About DCT Group
Digital Construction Technologies Group is an award winning, market leader in the field of Virtual Design and Construction (VDC). With strategic locations around the world, DCT Group’s digital solutions for construction projects enhance the design, collaboration, and communication processes of a project, while also improving strategic decision-making and developing the client’s digital capabilities.
DCT Group has the ability to virtually construct buildings on a project prior to their physical construction. This results in a number of benefits for the client, including decreased installation times due to increased on-site efficiency, waste reduction, reduced rework times, increased constructability, and an overall improvement in onsite health and safety.
Who We Are…
Digital Construction Technologies Group is an award winning, market leader in the field of Virtual Design and Construction (VDC).
We are different from other BIM consultancies in that our staff has experience working in the trades as design consultants and specialist contractors, implementing the highest standards and workflows necessary to successfully complete BIM projects.
By utilizing cutting-edge hardware and software, our team of experts is able to provide our clients with the highest level of cutting-edge digital expertise across all projects.
DCT Group is a group of talented industry innovators committed to providing our clients with the most dynamic and constructible work possible. We apply this philosophy to each and every project. We are extremely passionate about our work and strive to increase awareness of digital technology in the construction industry.
Our digital technology solutions improve design, collaboration, and communication throughout a project, while also improving strategic decision-making and maximizing our clients’ digital capabilities.
Joseph Mady
Chief Executive Officer – DCT Group – Ireland
Joseph Mady is Chief Executive Officer of DCT Group.
Joseph earned a BEng Tech and a BSc in Electrical Engineering Services Design, as well as an MSc in Applied Building Information Modeling and Management from TU Dublin, Ireland.
Joseph serves on the Construction Industry Federation’s 4.0 Committee (BIM), the NSAI Technical Committee on Building Information Modelling, and the CitA Eastern Region Steering Committee for BIM.
Joseph is accountable for the business’s strategic direction in Ireland, South America, and Europe. Along with his industry involvement, Joseph is a part-time lecturer at Technological University Dublin (TUD), where he teaches courses on continuous professional development for site teams and construction site management.
Marko Gašić
Managing Director – Digital Construction Technologies d.o.o. – Croatia
Marko Gašić is Managing Director of Digital Construction Technologies d.o.o. Croatia.
Marko is accountable for the leadership and expansion of the Croatian offices as the country integrates into the European market.
Marko moved from Croatia, where he worked as an electrician, to become a certified BIM Information Manager and Revit specialist, as well as complete a professional diploma in leadership and management titled “Managing People in Organizations.” He is currently pursuing a degree in construction site management.
Marko brings a wealth of industry experience from his work in the residential, commercial, pharmaceutical, and data center industries. With over a decade of experience in the construction industry, including Capital Dock (the country’s tallest building), Bristol-Myers Squibb (BMS) Cruiserath Biologics, and WuXi Biologics Dundalk, to name a few.
Fernando Perrone
Managing Director – Digital Construction Technologies SRL – Argentina
Fernando Perrone is Managing Director at DCT Group SRL Argentina.
fernando oversees the management of the company’s day to day activities.
Fernando ensures the company is implementing the group strategy and objectives in Argentina. Fernando has a vast experience in the construction sector, with more than 5 years in the industry. He is originally from Misiones Argentina, where he studied electro-mechanical engineering and several courses on CAD/BIM.
Fernando is a certified BIM modeler and has completed several large-scale projects such as surveying civil and electro-mechanical works in order to later digitize, Yacyretá Dam and Salto Grande Dam, as well as several MEP projects.
Gerardo Olsson
Operations Director – Digital Construction Technologies SRL – Argentina
Gerardo Olsson, is Operations Director at DCT Group SRL.
Gerardo’s primary objective is to increase DCT Group Argentina’s efficiency. Gerardo will do this by creating a pleasant but challenging work environment with open communication that enables his team to maintain a high level of service while also enabling the company to achieve long-term operational excellence, which will undoubtedly result in complete client satisfaction.
Gerardo has several years of experience implementing and managing BIM projects and a master’s degree in BIM management, as well as extensive knowledge of Autodesk and other BIM software.
Fionnuala Kilcoyne
Office Manager – DCT Group – Ireland
Fionnuala Kilcoyne is the office manager at DCT Group.
Fionnuala earned a CIPD Advanced Certificate in Human Resource Management from National College of Ireland and a CIPD Diploma in Industrial and Employment Relations from the same institution. Fionnuala is also a Chartered Institute of Personnel and Development (CIPD) Associate Member and a member of the Association of Professional Administrators in Ireland (APAI) (APAI).
Fionnuala began her career in administration, primarily in the financial industry in Dublin. She has extensive experience in human resources, including administrative, organizational, and analytical aspects of human resources.
Fionnuala brings a wealth of communication and management skills to her new role, which will see her oversee the DCT Group’s office, human resources, and day-to-day operations. Fionnuala collaborates closely with Group CEO, Joseph Mady, and the Managing Directors of the DCT Group’s Croatian and Argentinean offices.
Rodrigo Obregón
BIM Manager – Digital Construction Technologies SRL – Argentina
Rodrigo Obregón is a BIM Manager at DCT Group SRL.
Rodrigo has 10 years of experience working in the construction industry, from Misiones Argentina. Rodrigo has been awarded a master of works as a technician in cooperative & mutual administration. He has held the position of director of works for both cooperative and state entities. Rodrigo has completed leading CAD projects for architects and consulting firms globally. He became a BIM coordinator after working on a number of high end projects including Yacyretá Binational Dam (Civil Works, 4D), Salto Grande Binational Dam (Civil Works, point cloud processing) and WeWork (MEP Coordination in various projects).
Since joining DCT Group, he has expanded his construction knowledge with ongoing weekly training sessions and Rodrigo’s skill set in Revit, Navisworks, Revizto, 2D & 3D CAD and Civil 3D software has broadened his approach to innovative work ideologies. Rodrigo has been a part of multiple teams working on projects including data centres, multipurpose housing/amenity developments, commercial campuses, etc.
Ana Tiric
BIM Coordinator – DCT Group – Ireland
Ana Tiric is a BIM Coordinator at DCT Group.
Ana is a fully qualified structural engineer with extensive industry experience. Ana has a Bachelor of Science in Civil Engineering and a Master of Science in Structural Engineering, as well as extensive experience with the engineering design process.
Ana possesses a variety of strengths, including the ability to create highly detailed drawings, cost estimation, construction site supervision, and project management. Ana has managed a variety of large BIM projects that necessitate an in-depth knowledge and understanding of a variety of BIM software applications.
Ana is responsible for BIM coordination, clash management, detailing sheet production, and problem solving. Ana collaborates closely with clients, subcontractors, contractors, and consultants on-site to ensure a seamless project delivery.
Divya Chhadwa
BIM Coordinator – DCT Group – Ireland
Divya Chhadwa is a BIM Coordinator with DCT Group.
Due to her proactive approach and strong team spirit, Divya is one of the most sought-after BIM managers in the DCT Group. Divya has worked in the architectural and construction industries for ten years, in both Ireland and India.
As a registered architect with the Indian Council of Architecture C.O.A. and a combination of on-site and hands-on architecture work, she possesses a wealth of knowledge in the delivery of BIM projects.
Divya is knowledgeable about all facets of BIM software, and her strong organizational abilities and attention to detail are evident in her work. Divya’s strong communication skills enable teams to collaborate effectively across multiple disciplines to achieve optimal BIM performance.
Attia Metrayah
BIM Coordinator – DCT Group – Ireland
Attia Metrayah is a BIM Coordinator at DCT Group.
Attia is a fully qualified mechanical engineer with over 10 years’ experience on a variety of different projects including projects in the industrial, commercial, pharmaceutical, and domestic sectors. Attia has a wealth of experience as project coordinator, developing his knowledge regarding on-site installation process and electrical and the mechanical services coordination process.
Attia has a wealth of experience working with designers, consultants, contractors and sub-contractors. His work experience includes working closely with a main contractor and design team in relation to mechanical systems include Revit and AutoCAD modelling a range of mechanical systems.
Louis Slabbert
BIM Coordinator – DCT Group – Ireland
Louis Slabbert is BIM Coordinator at DCT Group.
Louis is a qualified draughtsman and Revit specialist with extensive years of working knowledge in the field. He is currently attending Fitzwilliam Institute attending the Construction Project Management Course.
Louis has good working knowledge of Revit MEP and understanding of all BIM software’s. Louis’s work experience in the industry includes CAD Technician and Assistant Surveyor/3D Laser Scanner. Louis has a wealth of in-field experience which he brings to his role at DCT Group.
Fernando Castellon
BIM Technician – DCT Group – Ireland
Fernando Castellon is a BIM Technician at DCT Group.
Fernando holds BSc degrees in Electrical Engineering and a DipHEc in Science in Computing. Fernando possesses strong working knowledge of Revit MEP, earning him an Autodesk Revit MEP 2015 certification.
Fernando has worked on large BIM projects for over four years, including sports arenas (World Cup and Olympic), subway stations (Sa Paulo’s Line 6), industrial plants (John Deere, Unilever, Polenghi), and a variety of office buildings.
Fernando has previously worked on BIM implementation teams, where he was responsible for developing models, families, procedures, and standards, as well as BEP.
Silvio Zupanic
BIM Technician – Digital Construction Technologies d.o.o. – Croatia
Silvio Zupanic is a BIM Technician for DCT Group Croatia.
He is a qualified draughtsman and Revit specialist, with extensive experience in the construction industry. Silvio has a wealth of knowledge of Revit MEP and Building Information Modelling (BIM) software.
Silvio began his career as a CAD Technician where he was responsible for development of HVAC systems, creating and coordinating complex mechanical models. With his experience across numerous software’s this has helped Silvio to transition to his role as a BIM technician with DCT Group.
Davor Skoko
BIM Technician – Digital Construction Technologies d.o.o. – Croatia
Davor Skoko is a BIM Technician for DCT Group Croatia.
Davor holds a bachelor’s degree in Civil Engineering from the University North, Croatia. Davor is currently in the process of completing a masters degree in Civil Engineering for the University North, Croatia. Davor holds extensive construction experience from his previous roles as construction site assistant and later as assistant site manager.
Davor has a wealth of knowledge of Building Information Modelling (BIM) software, AutoCAD, Revitzo, and Navisworks creating highly detailed models and drawings. Davor is currently working on a number of electrical models across both residential and pharmaceutical sectors.
Roqaya Abou Klaib
BIM Technician – DCT Group – Ireland
Roqaya Abou Klaib is a BIM Technician at DCT Group Ireland.
Roqaya is a fully qualified Architect and holds a Bachelor’s degree in Architecture Engineering, and a Post Graduate Diploma in Applied BIM Technologies. Currently Roqaya is currently in the final stages of being awarded MSc in Applied Building Information Modelling and Management. Roqaya has a wealth of experience across the construction industry and has worked on a number of different projects including residential and commercial buildings.
Roqaya has liaised with project managers, main contractors, and materials suppliers as part of her previous roles. She has experience in creating detailed drawings, estimating cost, analysing projects specifications and on site supervision. She has good working knowledge of Revit Architecture and understanding of all BIM software.
Dayse Franco
BIM Technician – DCT Group – Ireland
Dayse Franco is a BIM Technician at DCT Group Ireland.
Dayse is a qualified draughtsman, completed three years of Architecture, attaining a Revit course & Level 2 Building Information Modelling and holds an Internal Auditor Certificate in Integrated Management – IMS (ISO9001, ISO 14001 & OHSAS 18001).
Dayse began her career as a CAD Technician where she was responsible for the development of Architectural projects and creating and coordinating models. She has experience across multiple projects including industrial developments, educational developments and residential developments.
Graham Sheppard
BIM Coordinator – DCT Group – Ireland
Graham Sheppard is a BIM Coordinator at DCT Group Ireland.
Graham graduated from Dublin Institute of Technology with a BEng Electrical Services Engineering and also holds a PgCert BIM Technologies from DIT Bolton Street and a Certificate in Computer Aided Design.
Graham has extensive experience working on a variety of BIM projects in a variety of sectors, including data centers, educational facilities, industrial facilities, commercial buildings, and residential projects.
Graham collaborates closely with the DCT Group’s design team and collaborates with construction teams and clients to ensure that their projects are managed effectively from start to finish, bringing their designs to life through the use of BIM.
Owen McSweeney
BIM Coordinator – DCT Group – Ireland
Owen McSweeney is a BIM Coordinator at DCT Group Ireland.
Owen holds a MSc in Applied Building Information Modelling and Management from Dublin Institute of Technology, BSc Electrical Services Design and Energy Management from Dublin Institute of Technology and a B.Eng Energy and Environmental Engineering from Institute of Technology Tallaght.
Owen has extensive BIM experience working as a BIM Manager and Design Engineer on projects in the data centre, educational, industrial, commercial and residential sectors.
Owen will collaborate closely with the DCT Group’s design team to ensure that projects are managed effectively from start to finish, bringing their designs to life through the use of BIM.
Keith Walsh
BIM Lead – DCT Group – Ireland
Keith Walsh is BIM Lead at DCT Group Ireland.
Keith holds a NQAI National Craft Level 6 Advanced Plumbing certification.
Keith joins DCT Group from his previous career as a plumber/pipe fitter for 11 years prior to starting his journey into BIM. Keith has extensive experience as a BIM coordinator working on a variety of projects across the residential, data centre, commercial, healthcare and pharmaceutical sectors.
Client Testimonials
We are currently recruiting experienced BIM employees for the following roles:
BIM MANAGER
BIM MODELLING COORDINATOR
BIM INFORMATION COORDINATOR
BIM INFORMATION TECHNICIAN
Digital Construction Technologies Group Ireland
Digital Construction Technologies Group
Station Mews, Lindsay Grove,
Glasnevin,
Dublin, D09 CC922
info@dctgrp.com
Digital Construction Technologies Group S.R.L (Argentina)
Digital Construction Technologies Group
Corrientes 135,Obera,
Misiones
Argentina
info@dctarg.com
Digital Construction Technologies Group D.O.O (Croatia)
Digital Construction Technologies Group D.O.O
Savska 41,
10 000 Zagreb,
Croatia
info@dctgrp.hr